Featuring optical absolute method in the slim and strong unit body
 |
CE Approved
Products
Automotive applications
Coupling assembly inspection
Installed height measurement
Crankshaft dimension measurement
Screw head height measurement
Transmission parts height measurement
Automotive parts dimension measurement
Management of press-fit points of press-fit parts
Contact-type displacement sensor and load cell are used to manage pressure change point and stroke position for the confirmation of proper press-fit mounting.
Other applications
Motor shaft eccentricity measurement
X-Y stage position measurement
Tablet surface flatness measurement
Resin roller eccentricity measurement
| Type | General purpose | High precision | |||
|---|---|---|---|---|---|
| Standard type | Low measuring force type |
Standard type | Low measuring force type |
||
| Model No. | HG-S1010 | HG-S1010R | HG-S1110 | HG-S1110R | |
| CE marking directive compliance | EMC Directive, RoHS Directive | ||||
| Compatible controller | HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113 | ||||
| Position detection method | Optical absolute linear encoder method | ||||
| Measurement range | 10 mm 0.394 in | ||||
| Stroke | 10.5 mm 0.413 in or more | ||||
| Measuring force (Note 1, 2) |
Downward mount |
1.65 N or less 1.10 N (Note 3) |
0.35 N or less 0.30 N (Note 3) |
1.65 N or less 1.10 N (Note 3) |
0.35 N or less 0.30 N (Note 3) |
| Upward mount |
1.35 N or less 0.85 N (Note 3) |
– | 1.35 N or less 0.85 N (Note 3) |
– | |
| Side mount |
1.50 N or less 0.95 N (Note 3) |
0.25 N or less 0.20 N (Note 3) |
1.50 N or less 0.95 N (Note 3) |
0.25 N or less 0.20 N (Note 3) |
|
| Resolution | 0.5 μm 0.020 mil | 0.1 μm 0.004 mil | |||
| Sampling period | 1 ms | ||||
| Indication accuracy (P-P) (Note 2) |
Full range: 2.0 μm 0.079 mil or less Narrow range: 1.0 μm 0.039 mil or less (any 60 μm 2.362 mil) |
Full range: 1.0 μm 0.039 mil or less Narrow range: 0.5 μm 0.020 mil or less (any 60 μm 2.362 mil) |
|||
| Tip deviation amount | 35 μm 1.378 mil (typical) | ||||
| Hot swap function | Incorporated | ||||
| Operation indicator | 2-color LED (Orange / Green) | ||||
| Environmental resistance |
Protection | IP67 (IEC) (Note 4) | – | IP67 (IEC) (Note 4) | – |
| Ambient temperature |
-10 to +55 ℃ +14 to +131 ℉ (No condensation or icing), Storage: -20 to +60 ℃ -4 to +140 ℉ |
||||
| Ambient humidity |
35 to 85 % RH, Storage: 35 to 85 % RH | ||||
| Insulation resistance |
100 MΩ or more at 250 V DC | ||||
| Vibration resistance |
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each | ||||
| Shock resistance |
1,960 m/s2 acceleration in X, Y and Z directions three times each | ||||
| Mechanical life (Note 5) | 100 million times or more (typical) | ||||
| Mounting nut tightening strength | 12.5 N·m | ||||
| Probe tightening torque | 0.1 to 0.4 N·m (no force applied to main unit) | ||||
| Grounding method | Capacitor grounding | ||||
| Material | Body: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe (Note 7): Ceramic, Rubber bellows: NBR (black) | ||||
| Weight | Main unit weight: 80 g approx. | ||||
| Accessories | Standard type (HG-S1010 / HG-S1110): Sensor head fastening wrench 1 pc., Mounting nut 1 pc. Low measuring force type (HG-S1010R / HG-S1110R): Sensor head fastening wrench 1 pc., Mounting nut 1 pc., Rubber bellows 1 pc. |
||||